DT1 14kg: One Coat Waterproofing Membrane

Description

USES:

• Flat roofing
• Details on single ply or torch on membranes
• Metal decks and cut edge corrosion

FEATURES AND BENEFITS:

• Excellent UV resistance
• One coat application
• Fast curing
• No reinforcement required
• Great adhesion to most substrates without primer
• Ideal for vertical applications and gap bridging
• Coverage 1,5kg m2
• can be used on damp substrates
• 10 year guarantee
• Instantly shower proof
• Voids and gaps larger than 5mm have to be bridged using Eagle matting
• Traffic grey

GENERAL CHARACTERISTICS:
Fast and easy application with a roller, Fast and easy application with a solvent resistant roller in one coat. EAGLE DT1 offers high crackbridging capacity and resistance to UV Rays, stagnant water and ice. It maintains its physical properties between -30°C and +90°C. It is permeable to water vapor and allows surfaces to breathe. It also has excellent adhesion and chemical resistance and contains no toxic substances after curing. It has a traffic grey colour.
APPLICATION INSTRUCTIONS
Apply when the ambient temperature is between 2ºC and rising, and 35ºC.
Ensure the substrate is in good condition, dry, clean, and free of loose particles, dust, moss, lichen, or other contaminants that could compromise the membrane’s adhesion. Cracks and damage must be repaired before application.
EAGLE DT1 is a ready-to-use product. Open the container and mix well, either by hand or with a low-speed mixer.

TECHNICAL DATA:

PACKAGING:
4.5 kg and 14 kg metal cans. Light grey.

SHELF LIVE:
18 months at temperatures between 5° C and 35° C, provided it is stored in a dry place. The manufacturing date is on the label.

HANDLING AND TRANSPORT
These safety recommendations are necessary for the application process and during exposure to loading ma-chinery. Respiratory Protection: Use an air-purifying respirator when handling or spraying. Skin Protection: Wear rubber gloves and remove them immediately if contaminated. Wear clean protective clothing and wash tho-roughly with soap and water after work or before eating, drinking, or smoking. Eye/Face Protection: Wear safety goggles to avoid splashing and exposure to airborne particles. Disposal: Minimize waste generation. Incinerate under controlled conditions in accordance with local and national regulations. Consult the product safety data sheet (MSDS) or contact our technical department.